Silent Driver 10 – 100cm2
Capacity: 5cm2 to 100cm2
Dimensions: 2.5 x 2.5 x 0.8cm
Description
Silent Automotive 100cm2 EL Inverter
This is a dedicated EL Inverter (exciter circuit) it is tweaked to perform best with EL Panel and tapes (though it can also drive up to 3m of EL Wire, but not as brightly as a multi-use inverter would)
These specialist inverters have been designed for use powering EL Panels in cars, ideally for kick plates.
They are silent and also have an earth which helps remove any EM interference
These exciter circuits are most useful for EL Panels in the scuff plate of doors, as well as ones that backlight dashboard displays.
The Inverter has a 2.1/5.5mm jack plug built in (this is a standard 12v connector).
For the 12v version you will find these compatible Power Inputs options in the drop down selection:
Only Inverter
You may already have your own 12v input with a 2.1/5.5mm connector.
This is usually the solution if you want to run the inverter off your own 12v battery
To make this inverter portable then just plug in this battery box.
Please note that rechargeable AA batteries are lower voltage than standard batteries so cannot really be used effectively with this battery box
These 18650 rechargeable batteries have now become popular and widely available. This Battery Box will plug straight into the driver and will make this EL Driver portable and rechargeable
These are smaller and lighter than the Battery Box, the 3000mAh Li-ion battery gives the same life as the 8xAA Battery Box with fresh alkaline batteries
1000mAh: 81g (6.5cm x 3.7cm x 1.8cm)
1800mAh: 145g (5.6cm x 3.8cm x 3.1cm)
3000mAh: 172g (7.3cm x 5.6cm x 2.2cm)
5000mAh: 265g (6.0cm x 5.8cm x 3.9cm)
All of these Li-ion Batteries come with an intelligent recharger
(*Li-ion Batteries are only available to the UK due to airmail postal restrictions)
This will convert mains electricity to 12v so it can be used as a handy input for this inverter
This adaptor plugs into the car lighter socket. It is fused and ends with a 5.5mm/2.1mm jack plug so it can be used with any of our 12v Drivers or accessories
All of these external power inputs, as well as extras such as 12v remote controllers, can be found in Additional Items