In-line Dimmer Controller
This in-line dimmer controller is 8.1cm x 6.6cm x 2.8cm
In stock
Description
12v In-Line Dimmer Controller
This in-line dimmer controller is not an inverter / driver itself
It sits between the power output and a 12v inverter, giving you complete control over the brightness of your EL Panels, Tapes or Wires
This In-line dimmer controller comes ready to plug in with 5.5mm/2.1mm jack plug and can be used with any of our power supplies below:
Perfect if you already have your own 12V battery to run a driver
This 8xAA Battery Box will plug straight into the driver. It is fairly large (132mm x 73mm x 20mm) but will make an EL Driver portable
3) 3 x 18650 Rechargeable Battery Box
This 3 x 18650 Rechargeable Battery Box will plug straight into the driver. It is fairly large (76mm x 60mm x 20mm) and the leads for the output are 15cm long but will make an EL Driver portable.
4) Rechargeable Li-ion Battery
Much smaller and lighter than the Battery Box, these powerful Li-ion batteries come in a range of sizes
1800mAh (square): 125g (5cm x 3.3cm x 2.7cm)
3000mAh: 172g (7.3cm x 5.6cm x 2.2cm)
5000mAh: 250g (5.3cm x 5.8cm x 3.9cm)
All of these Li-ion Batteries come with an intelligent recharger
(Li-ion Batteries are only available to the UK due to airmail postal restrictions)
This adaptor plugs into the car lighter socket. It is fused and ends with a 5.5mm/2.1mm jack plug so it can be used with any of our Drivers or Additional Items
Most people also use Splitters that come from the Driver to the EL Wire (so you only need 1 x Driver for many EL Panels or Wires) – you can get those types of EL SPLITTERS HERE
*If you want more than one of the power connectors, mentioned above, for your EL Driver they can all be found in our Additional Items section, or just click the description you want and be taken to its own page*
Visit our sister site elwirecraft for an extensive range of EL products for your craft projects.