+44 (0) 1435 860753
Dedicated EL Inverter for 2,500 to 3,500cm2
This is a dedicated EL inverter so it is tweaked to perform best with EL Panel and tapes (though it can also drive EL Wire) and can light up to between 2,500 and 3,500 square centimetres of EL Panel or Tape.
These Inverters are well-built, designed for long term use and are housed in a strong metal box with good airflow. They feature top of the range toroidal transformers which run silently.
You will find this comes in two different types, please choose the Dimmable option if you want to be able to control the brightness and blink speed of the flash.
This is a powerful inverter and to protect it must have a minimum of 2,500squ cm of EL panel or tape attached when switched on.
The Inverter comes with a 2.1/5.5mm jack plug built in (this is a standard 12v connector).
You will find this 12v powered driver has a number of compatible power input options in the drop down menu:
You may already have your own 12v input with a 2.1/5.5mm connector.
This is usually the solution if you want to run the inverter off your own 12v battery.
To make this inverter portable then just plug in this battery box.
Please note that rechargeable AA batteries are lower voltage than standard batteries so cannot really be used effectively with this battery box.
These are smaller and lighter than the Battery Box, the 3000mAh Li-ion battery gives the same life as the 8xAA Battery Box with fresh alkaline batteries.
3000mAh: 172g (7.3cm x 5.6cm x 2.2cm)
5000mAh: 265g (6.0cm x 5.8cm x 3.9cm)
All of these Li-ion Batteries come with an intelligent recharger.
(*Li-ion Batteries are only available to the UK due to airmail postal restrictions)
This will convert mains electricity to 12v so it can be used as a handy input for this inverter.
All of these external power inputs, as well as extras such as 12v remote controllers, can be found in Additional Items
<< Return To Category: